MOXA WAC-1001
Industrial Wireless Access Controller
- Power input by redundant 24 VDC power inputs
- Less-than-50ms Turbo Roaming for seamless wireless connection
- IEEE802.11i-compliant Wireless security
- DIN-Rail or wall mounting ability for onsite installation
- IP30 protected high-strength metal housing
- -40 to 75°C operating temperature range (-T model)
The goal of zero-latency-roaming is to create clients that can maintain communications seamlessly as they move from one access point to another. Moxa has introduced next generation Turbo Roaming technology with the WAC-1001 for the 50ms-roaming-enabled AWK series. This advanced roaming capability delivers high-speed secure handoffs. Wireless clients can roam between APs in under 50 milliseconds while preserving robust security in extremely demanding environments.
Maximum Availability
• Less-than-50ms Turbo Roaming
• Configuration back-up
• Dual redundant DC power inputs
Advanced Security
• IEEE802.1X/RADIUS supported
• WPA/WPA2/802.11i supported
• Integrated DI/DO for on-site monitoring and warnings
Maximum Availability
• Less-than-50ms Turbo Roaming
• Configuration back-up
• Dual redundant DC power inputs
Advanced Security
• IEEE802.1X/RADIUS supported
• WPA/WPA2/802.11i supported
• Integrated DI/DO for on-site monitoring and warnings
WLAN Interface
LAN Interface
Interface
Physical Characteristics
Environmental Limits
Power Requirements
Standards and Certifications
Reliability
- Standards
IEEE 802.11i for Wireless Security
IEEE 802.3u for 10/100/1000BaseT(X)
IEEE 802.3af for Power-over-Ethernet
Security
WPA /WPA2-Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP, and AES)
LAN Interface
- Standards
IEEE 802.1x (Radius client)
IEEE 802.3u for 10/100/1000BaseT(X)
IEEE 802.3af for Power-over-Ethernet
Interface
- LAN Port
- +13 to +30 V for state “1”
- +3 to -30 V for state “0”
- Max. input current: 8 mA
10/100/1000BaseT(X), auto negotiation speed (RJ45-type)
Console
RS-232 (RJ45-type)
LED Indicators
PWR1, PWR2, PoE, FAULT, STATE, LAN
Alarm Contact
1 relay output with current carrying capacity of 1 A @ 24 VDC
Digital Inputs
2 electrically isolated inputs
Physical Characteristics
- Housing
Metal, providing IP30 protection
Weight
1060 g
Dimensions
52.85 x 135 x 105 mm (2.08 x 5.31 x 4.13 in)
Installation
DIN-Rail mounting, wall mounting (optional)
Environmental Limits
- Operating Temperature
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Power Requirements
- Input Voltage
12 to 48 VDC, redundant dual DC power inputs or 48 VDC Power-over-Ethernet (IEEE 802.3af compliant)
*Compliant with EN 50155 on 24 VDC
Connector
10-pin removable terminal block, 500 V insulation
Power Consumption
Max. 7.2 W (12V/0.6A to 48V/0.15A), 25°C
Reverse Polarity Protection
Present
Standards and Certifications
- Safety
UL 60950-1, EN 60950-1
EMC
EMI: CISPR 22, FCC Part 15B Class B
EMS:
EN 61000-6-2/61000-6-4
IEC 61000-4-2 ESD: Contact 8 kV; Air 15 kV
IEC 61000-4-3 RS: 10 V/m (80 MHz to 1 GHz)
IEC 61000-4-4 EFT: Power 2 kV; Signal 1 kV
IEC 61000-4-5 Surge: Power 2 kV; Signal 1 kV
Note
Please check Moxa’s website for the most up-to-date certification status.
Reliability
- MTBF (mean time between failures)
477,425 hrs
Available Modules | |
WAC-1001 | Industrial wireless access controller, supported models: AWK-RTG series, 0 to 60°C operating temperature |
WAC-1001-T | Industrial wireless access controller, supported models: AWK-RTG series, -40 to 75°C operating temperature |
Customers who viewed this item also viewed