Advantech BB-856-19725
Product is End of Life : 2021-12-21
10/100 Mbps Managed Optical Demarcation Compact CPE Device, TP-TX/FX-SM1310/PLUS-ST, w/ AC Adapter
- Loopback troubleshooting
- SNMP Manageable
- Power options: AC, DC and 802.3af Power over Ethernet (PoE)
- Bi-directional Bandwidth control
- MTU: Supports over-sized packets up to 1916
- Supports passive 802.3ah OAM (Operation, Administration & Management
The compact IE-MiniFiberLinX-II provides point-to-point fiber optic connections with a unique management tool to monitor the entire link between two locations. IE-MiniFiberLinX-II CPE for fiber optic networks allows service providers to deliver “triple-play” voice, video and data services to customer premises.
As a copper-to-fiber converter, the IE-MiniFiberLinX-II supports multiple fiber types including multi-mode, single-mode, single-strand fiber (SSF), and Course Wavelength Division Multiplexing (CWDM) functionality to increase the capacity of existing fiber. As a remote, CPE device, it can be connected via the fiber segment to an iMcV-FiberLinX-II Host module to support Host/Remote management.
Equipped with one 100 Mbps fiber data port, one 10/100 twisted pair port for data and management, as well as an auxiliary port designed to function as a serial port (when used with the included adapter), the IE- MiniFiberLinX-II also offers multiple powering options: AC power (with included adapter), DC (through a 4-terminal power block), as well as Power over Ethernet, acting as a Powered Device (PD) to draw power when connected to 802.3af compliant Power Sourcing Equipment (PSE). Telco versions that support -48 VDC are also available.
Combining copper-to-fiber conversion, extended temperature performance, plug-and-play operation, miniature size and multiple power options, the IE-MiniFiberLinX-II is one of the most versatile fiber optic CPE devices available.
As a copper-to-fiber converter, the IE-MiniFiberLinX-II supports multiple fiber types including multi-mode, single-mode, single-strand fiber (SSF), and Course Wavelength Division Multiplexing (CWDM) functionality to increase the capacity of existing fiber. As a remote, CPE device, it can be connected via the fiber segment to an iMcV-FiberLinX-II Host module to support Host/Remote management.
Equipped with one 100 Mbps fiber data port, one 10/100 twisted pair port for data and management, as well as an auxiliary port designed to function as a serial port (when used with the included adapter), the IE- MiniFiberLinX-II also offers multiple powering options: AC power (with included adapter), DC (through a 4-terminal power block), as well as Power over Ethernet, acting as a Powered Device (PD) to draw power when connected to 802.3af compliant Power Sourcing Equipment (PSE). Telco versions that support -48 VDC are also available.
Combining copper-to-fiber conversion, extended temperature performance, plug-and-play operation, miniature size and multiple power options, the IE-MiniFiberLinX-II is one of the most versatile fiber optic CPE devices available.
SPECIFICATIONS
GENERAL
- Preserves complete end-to-end fiber connection integrity
Bi-directional bandwidth control (per port, per direction, per VLAN)
Read/write IEEE 802.1Q VLAN-tags
Extra Tagging with Q-in-Q mode (802.1p)
Supports passive 802.3ah OAM (Operation, Administration & Management)
QoS: IEEE 802.1p-based packet prioritization (2 queues [high/low] with 8 levels of priority)
VLAN filtering up to 32 values
Layer 2 packet switching, store and forward operation
Forwarding rate: 14,881 pps for 10 Mbps; 148,810 pps for 100 Mbps
AutoCross for MDI/MDIX
Features Auto Negotiation and Selective Advertising
Supports Half and Full-Duplex operation
MTU: Supports over-sized packets up to 1916 bytes per packet
Ethernet Connectors
1 x RJ-45 1 x SC type fiber connector
SECURITY
- Password Control
Multiple Access Levels: User Assigned Accounts & Access Levels
MANAGEMENT
- SNMP V1 and V2c compatible
Includes GUI-based iView² software for remote management and upgrades
Monitors far-end (remote) status without a physical presence or separate connection
IEEE 802.3x Flow Control
Includes DHCP and TFTP clients
Supports Telnet
Includes loopback test modes (MAC swap)
Includes LinkLoss and FiberAlert
Remote capabilities with built-in support for UMA (IP-less management)
RS-232 (Craft) interface for local management
Serial cable for direct connection to a PC’s Serial Port
ETHERNET PROTOCOLS SUPPORTED
- IEEE 802.3i 10Base-T twisted pair
IEEE 802.3u 100Base-TX twisted pair
IEEE 802.3u 100Base-FX or SX fiber
MECHANICAL
- Dimensions
0.83”H x 1.80”W x 3.35”D
(2.11 x 4.57 x 8.51 cm)
POWER
- AC Wall Adapter:
100 to 240 VAC ±10% input, 5 VDC output, 2A max.
DC Input Voltage:
12 to 48 VDC *, 1 to .02A, 7 to 50 VDC, 1 to 0.1A
IEEE 802.3af Power over Ethernet
ENVIRONMENTAL
- Operating Temperature
+14° to +122°F (-10° to +50°C) AC Adapter
-13° to +167°F (-25° to +75°C) DC Adapter
Storage Temperature
-49° to +185° F (-45° to +85° C)
Operating Humidity
5 to 95% Non-condensing
REGULATORY APPROVALS
- FCC Class A
UL/cUL, CE, CSA, CB
ORDERING INFORMATION
MODEL NUMBER | FIBER | FIBER PORTS | RANGE | ETHERNET PORTS | ETHERNET CONNECTOR |
IE-MiniFiberLinX-II | |||||
BB-856-19717 | MM850-ST | 1 | 2 km | 1 | RJ45 |
BB-856-19718 | MM850-SC | 1 | 2 km | 1 | RJ45 |
BB-856-19722 | MM1300-ST | 1 | 5 km | 1 | RJ45 |
BB-856-19723 | MM1300-SC | 1 | 5 km | 1 | RJ45 |
BB-856-19724 | SM-1310/PLUS-ST | 1 | 40 km | 1 | RJ45 |
BB-856-19725 | SM1310/PLUS-SC | 1 | 40 km | 1 | RJ45 |
BB-856-19727 | SM1310/LONG-SC | 1 | 80 km | 1 | RJ45 |
BB-856-19735 | SM1310/PLUS-SC | 1 | 30 km | 1 | RJ45 |
SINGLE STRAND FIBER * | |||||
BB-856-19752 | SSFX-SM1310-SC | 1 | 20 km | 1 | RJ45 |
BB-856-19753 | SSFX-SM1550-SC | 1 | 20 km | 1 | RJ45 |
BB-856-19755 | SSFX-SM1550/ PLUS-SC | 1 | 40 km | 1 | RJ45 |
BB-856-19757 | SSFX-SM1550/ LONG-SC | 1 | 60 km | 1 | RJ45 |
IE-MiniFiberLinX-II/Telco/LastGasp | |||||
BB-856-17723 | MM1300-SC | 1 | 5 km | 1 | RJ45 |
BB-856-17727 | SM1310/PLUS-SC | 1 | 30 km | 1 | RJ45 |
BB-856-17729 | SM1310/LONG-SC | 1 | 80 km | 1 | RJ45 |
SINGLE STRAND FIBER * | |||||
BB-856-17742 | SSFX-SM1310-SC | 1 | 20 km | 1 | RJ45 |
BB-856-17743 | SSFX-SM1550-SC | 1 | 20 km | 1 | RJ45 |
BB-856-19762 | SSFX-SM1310-SC | 1 | 20 km | 1 | RJ45 |
* These products have single-strand fiber technology. Deploy in pairs or connect another compatible Advantech B+B SmartWorx LLC single-strand fiber product.
Customers who viewed this item also viewed