Advantech BB ER75i v2 Series
(Conel)
Product is End of Life : 2022-01-14
Cellular Routers GPRS/EDGE
- Designed for M2M applications
- WiFi, M-BUS and Modbus TCP / Modbus RTU
- Modular design to fit application requirements
- Single or dual SIM cards for redundant backhaul
- Up to 85.6 KBps upload / 236.8 KBps download
- LINUX platform & advanced networking functions
- Advanced security features
GPRS/EDGE ER75i v2 router is used to wirelessly connect various equipment and devices via Ethernet interface 10/100 to the Internet or intranet. With a high security level and wide coverage of GPRS/ EDGE technology provided by mobile phone operators, it is mostly used in industrial applications, for remote maintenance and service of machines, or for data transfer from solar or wind power plants. Other benefits and advantages includes high modularity and option to connect various devices via Ethernet 10/100, RS232, RS485, RS422, M-Bus or I/O.
Key features As a standard, this industrial ER75i v2 wireless router is equipped withone Ethernet 10/100, one USB Host port, one binary input/output (I/O) port and one SIM card. To save and backup communication data, a version with 2 SIM cards is available. The wide range of interface options of this wireless router further expands an optional Port1 and Port2 - selected by the customer. For example, Ethernet port 10/100, serial interface ports RS232/RS485/RS422/M-Bus or (I/O - CNT). Port2 may be equipped with serial interfaces RS232/RS485/RS422/M-Bus or (I/O - CNT). The wireless router is supplied either in a plastic or metal casing, based on the requirements of the customer. WiFi models are available (“F” version of router).
Configuration is done via web interface protected by password. The GPRS/EDGE router supports creation of VPN tunnels using chnologies IPsec, OpenVPN and L2TP to ensure safe communication. Web interface provides detail statistics about the wireless router activities, signal strength, detailed log, etc. Router supports functions: DHCP, NAT, NAT-T, DynDNS, NTP, VRRP, control by SMS and many other functions.
Other diagnostic functions to ensure continuous communication include automatic inspection of PPP connection offering an automatic restart feature - in case of connection losses, or hardware watchdog which monitors the status of the router. With the help of a special start up script window, you may insert Linux scripts for various actions. For some applications the option to create several different configurations for one wireless GPRS/EDGE router, the profiles (maximum of 4), and the option to switch between them (for example via SMS, binary input status, etc.) is essential. Cellular wireless routers may automatically upgrade configuration and firmware from server. This allows mass reconfiguration of many routers in one time.
SELECTED APPLICATIONS
- Transportation and security
- IT and communication
- Self-service terminals
- Energy and power industry
- Metrology, alarm and warning systems
SPECIFICATIONS
FIXED INTERFACES - BASIC VERSION | |
1× Ethernet | 10/100 Mbits, independent or bridged |
1× SIM | SIM Card |
1× I/O | Binary input/output |
1× USB | USB 2.0 Host, Type A |
OPTIONAL INTERFACES | |
1× Optional port (PORT 1) | Ethernet (10/100Mbps), RS232, RS422/485, M-BUS, I/O Input/Output, Ethernet Switch (with PORT 2) |
ANTENNA CONNECTORS | |
1x SMA – 50 Ohm |
FIXED INTERFACES - FULL VERSION | |
1× Ethernet | 10/100 Mbits, independent or bridged |
2× SIM | SIM Card |
1× I/O | Binary input/output |
1× USB | USB 2.0 Host, Type A |
OPTIONAL INTERFACES | |
1× Optional port (PORT 1) | Ethernet (10/100Mbps), RS232, RS422/485, M-BUS ,I/O Input/Output, Ethernet Switch (with PORT 2) |
1× Optional port (PORT 2) | RS232, RS422/485, M-BUS, WMBUS, WiFi Ethernet Switch (with PORT 1) |
ANTENNA CONNECTORS | |
1x SMA – 50 Ohm |
POWER | |
Source | 9 - 36 VDC |
Consumption | Idle - 2 W Transmission - 5 W |
MECHANICAL | |
Dimension Plastic version | 51 x 87 x 116mm |
Dimension Metallic version | 42 x 87 x 113mm |
Protection | IP30 |
Weight Plastic version | 150 g |
Weight Metallic version | 280 g |
ENVIRONMENTAL | |
Operating Temperature | -40 to +75°C |
Storage Temperature | -40° to +85°C |
Humidity | Operating - 0 to 95% relative humidity non condensing Storage - 0 to 95% relative humidity non condensing |
WIFI *optional (“F” router versions) | |
Antenna connector | R-SMA – 50 Ohms |
Supported WiFi band | 2.4 GHz |
Standards | 802.11b, 802.11g, 802.11n |
2.4 GHz supported channels | 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 |
RX Sensitivity | 11b, 11 Mbps: typ. -85 dBm 11g, 54 Mbps: typ. -70 dBm (HT20) 11n, MSC7: typ. -66 dBm (HT40) 11n, MSC7: typ. -62 dBm |
TX Output Power | 11b, 11 Mbps: min. 18, typ. 19, max. 20 dBm 11g, 54 Mbps: min. 14.5, typ. 16, max. 17.5 dBm 802.11n (HT20): min. 13.5, typ. 15, max. 16.5 dBm 802.11n (HT40): min. 13.5, typ. 15, max. 16.5 dBm |
Type of device | Access point, station |
PARAMETERS - EDGE module | |
Frequency bands | EGSM850, EGSM900, GSM1800 and GSM1900 |
Transmit power | Class 4 (2 W) for EGSM850 Class 4 (2 W) for EGSM900 Class 1 (1 W) for GSM1800 Class 1 (1 W) for GSM1900 |
32B ARM MICROPROCESSOR | |
Memory | 512 Mb DDR SDRAM 128 Mb FLASH 1 Mb MRAM |
I/O PORT (CNT) | |
Binary input Binary output | Reed contact with trigger level 1.3 up to 1.4 V 100 mA/ max. 30 V |
SOFTWARE FEATURES | |
Linux based, possibility to program your own application | |
NTP client, NTP Server – time synchronization | |
SMS communication – AT commands on RS232, Ethernet and I/O | |
M-RAM memory inside – router statistic ́s saving into memory | |
NETWORKING | |
DHCP – automatic IP addressing in LAN network | |
NAT/PAT – IP address and ports translation between inside/outside network | |
VRRP – virtual backup router function | |
DynDNS client – access to the router with a dynamic IP address | |
Dial-in – the ability to communicate over dial CSD call | |
PPPoE Bridge – PPP frames encapsulation inside ETH frames | |
VPN TUNNELING | |
IPsec, OpenVPN, L2TP – secure encrypted tunnels | |
CONFIGURATION AND DIAGNOSTIC | |
HTTP server – configuration via web server | |
Telnet – configuration and access to the file system | |
SNMP – router diagnostics, communication with I/O and M-Bus | |
GPRS state signalization by LED | |
On-line info on GSM signal status (level, cell, neighbors) | |
SMS info – power on, GPRS connection or disconnection | |
SMS control – on/off GPRS connection, switch SIM, I/O etc. | |
Transferred data counting, one more APN as backup | |
Remote router group configuration change, switching among configuration profiles | |
SSH – encrypted configuration and access to the file system | |
STANDARDS/REGULATION | |
Telecom and Emission | ETSI EN 301 511 V12.5.1 (2017-03), ETSI EN 300 328 V2.1.1 (2016-11), ETSI EN 300 220-2 V3.1.1 (2017-02) |
EMC | ETSI EN 301 489-1 V2.1.1 (2016-11), Draft ETSI EN 301 489-52 V1.1.0 (2016-11), ETSI EN 301 489-17 V3.1.1 (2017-02), ETSIEN 301 489-3 V2.1.1 (2017-03) |
Safety | EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 + AC:2011 |
Ordering Information
Available Modules | |
BB-ER2B510010 | ER75i v2 Industrial GPRS/EDGE router, EMEA, Plastic, No ACC |
BB-ER2B510011 | ER75i v2 Industrial GPRS/EDGE router, EMEA, Plastic, ACC EU |
BB-ER2B510020 | ER75i v2 Industrial GPRS/EDGE router, EMEA, Metal, No ACC |
BB-ER2B510021 | ER75i v2 Industrial GPRS/EDGE router, EMEA, Metal, ACC EU |
BB-ER2B511011 | ER75i v2B ETH set |
BB-ER2B511021 | ER75i v2B ETH SL set |
BB-ER2B512011 | ER75i v2B RS232 set |
BB-ER2B512021 | ER75i v2B RS232 SL set |
BB-ER2B513011 | ER75i v2B RS485 set |
BB-ER2B513021 | ER75i v2B RS485 SL set |
BB-ER2B514010 | ER75i v2B RS422 |
BB-ER2B515011 | ER75i v2B MBUS set |
BB-ER2B515021 | ER75i v2B MBUS SL set |
BB-ER2B516011 | ER75i v2B CNT set |
BB-ER2B516021 | ER75i v2B CNT SL set |
BB-ER2F511021 | ER75i v2F ETH SL set |
Customers who viewed this item also viewed