TERZ NITE-RF Fast Ethernet
Unmanaged Industrial Ethernet Switch RJ45 with only 32.5 mm installation depth
- Flexible use with 24 VAC/VDC
- IP30 metal housing
- Minimal installation depth 32.5 mm
- Inrush current limitation
- Temperature range -40 to +70°C
- Stable mounting on 35mm DIN rail
- Polarity protection
- PROFINET suitable
With an installation depth of only 32.5 mm and a height of 105 mm, the Industrial Ethernet switches impress with their extremely flat and high-quality aluminium housing. The ultra-compact switches can be used in any control cabinet thanks to the 24 VAC/VDC power supply with inrush current limiting and reverse polarity protection. Due to the reduced footprint and the arrangement of all connections on the front , switch cabinets and cabling can be optimized to reduce the costs. The high-quality DIN rail holder made of metal ensures a firm and secure hold on the DIN rail. Like all TERZ Industrial Ethernet switches, the flat NITE-RF are available in two frame forwarding variants and fully suitable for PROFINET applications.
General
- Switch:
IEEE802.3 Store and Forward; non-blocking wire speed
Auto-Negotiation, Auto-MDI-X, Auto-Polarity:
Yes
Frame size:
2,048 Bytes
MAC table size:
2,000 addresses
Quality of Service:
Yes – 4 priority queues
Energy Efficient Ethernet:
No
Flow Control:
No
PROFINET suitable:
Yes
Port count (RJ45) | 5 | 8 | 16 |
MTBF (SN 29500, Mio. h) |
2.709 | 2.005 | 1.109 |
Frame Forwarding (Art.-No.) | xxxxx0 | xxxxx1 |
LLDP, PTCP Delay 01:80:C2:00:00:0E | Forwarding | Blocking |
RSTP BPDU 01:80:C2:00:00:00 | Forwarding | Forwarding |
Ethernet Interfaces
- IEEE Standards:
802.3 10BaseT, 802.3u 100BaseT(X)
Isolation:
0.75 kVDC; Ethernet Port ↔ housing | Port ↔ Port
Connection type:
RJ45
Port Count | Speed:
5,8 Ports | 10/100 Mbit/s
Cable length:
100 m (Twisted Pair, 0.14 mm² - 0.22 mm², Cat 5)
Power supply / electronics
- Nominal voltage:
Vin 24 VAC / 24 VDC
Permitted voltage range:
8 to 28 VAC / 9 to 36 VDC
Connection type:
3-pole pluggable, screw connector (+ - FE)
Wire cross-section:
0,08 to 2,5 (AWG 28 to 12)
Supply circuit:
SELV DIN 60950 (circuit breaker 10 A)
Inrush current limiter:
Yes
Input fuse:
Yes, Interrupting rating 50 A @ 125 VAC / VDC
Polarity protection:
Yes
Power failure bridging:
10 ms DIN 50155
PCB Conformal Coating:
No
Protection category:
III
Isolation:
0.75 kVDC; Vin ↔ Ethernet Ports | Vin ↔ housing
Port count (RJ45) | 5 | 8 | 16 |
Power consumption (W) Idle | full load |
0.4 | 0.9 | 0.4 | 1.15 | 1,9 | 2,3 |
Input current (mA) Idle | full load |
16 | 36 | 16 | 48 | 78 | 99 |
Inrush current (A) | 8 | 8 | 8 |
Mechanical properties
- Housing material:
Anodised aluminium, stainless steel
Mounting:
35 mm DIN rail
IP Protection class (operation):
IP30
Port count (RJ45) | 5 | 8 | 16 |
Width (mm) | 42 | 58 | 110 |
Height (mm) | 105 | 105 | 105 |
Depth (mm) | 32,5 | 32,5 | 32,5 |
Weight (g) | 205 | 255 | 405 |
EMC and environmental specifications
- Operating temperature:
-40°C to 70°C
Storage temperature:
-40°C to 85°C
Relative humidity (operation):
0%-95% (not condensing)
Relative humidity (storage):
0%-95% (not condensing)
Atmospheric pressure (operation):
2,000 m (795 hPa)
EMC immunity:
DIN EN - 61000-6-2, 55024
EMC radiated emission:
DIN EN 61000-6-4, 55032
Mechanical stability:
DIN EN 61373
Approvals and certifications
- CE, DIN EN 60950-1
Status and diagnostic indicators
- LED:
Power | Link/Activity per Port
ORDERING INFORMATION
Available Modules | ||
---|---|---|
Article | Art.-No. | Specification |
NITE-RF5-1100 | 111400 | 5xRJ45, IP30, FE, 24 V |
NITE-RF8-1100 | 111600 | 8xRJ45, IP30, FE, 24 V |
NITE-RF16-1100 | 111800 | 16xRJ45, IP30, FE, 24 V |
NITE-RF5-1101 | 111401 | 5xRJ45, IP30, FE, 24 V, LLDP Blocking |
NITE-RF8-1101 | 111601 | 8xRJ45, IP30, FE, 24 V, LLDP Blocking |
NITE-RF16-1101 | 111801 | 16xRJ45, IP30, FE, 24 V, LLDP Blocking |
Customers who viewed this item also viewed