Perle IRG7000 5G LTE Routers
Enterprise-Class Edge 5G Router & Gateway
- 5G LTE Router for Primary or Failover Connectivity
- Cellular Band Operation Certified Worldwide over 5G with fallback to 4G & 3G
- Out of band management for remote troubleshooting
- Cloud Hosting -- Deploy and manage your network from the cloud
- 4-port 10/100/1000 Ethernet
- Network connectivity via 5G LTE, Ethernet, USB, and Serial
- RS232, RS485, Alarm Relay, and multiple I/O to connect equipment
- Advanced feature set with NO Annual Fees
Perle IRG7000 5G LTE Routers and Gateways have the most comprehensive set of features, functionality, and performance to provide primary or failover back-up 5G LTE connectivity to remote infrastructure and assets. These ultra-low-power, rugged, high-performance Cellular Routers, with dual-SIM slots, can be quickly and easily deployed using an intuitive web GUI. For advanced admin scrips, RESTFul API and CLI commands are also available.
Perle IRG7000 LTE Routers provide fast, secure, and reliable managed 5G network connectivity where wired options are impossible to deploy or require a backup. This is crucial for enabling a wide range of applications while ensuring the highest degree of security to protect the integrity of critical services. Reduce the cost of downtime and service calls, and bringing distributed sites online faster. With support for Data, SMS, Voice, and Video, an IRG7000 and can be integrated into any enterprise cloud, building, industrial, or mobile location network infrastructure.
- Building and process automation controllers, Internet of Things (IoT)
- Smart grid assets (meters, switches, controllers), Telco infrastructure controllers
- SCADA, Distribution management systems, Remote data loggers, flow meters, sensing equipment
- Digital signage, ATMs, POS, Kiosks, Temporary "pop-up” stores
- Video surveillance controllers, IP cameras, Mobile hotspots
- Fleet management, GPS/GNSS Location tracking, Taxis, Public Service Vehicles, vehicle area networking (VAN)
- Public Service Vehicles, First responders, Command Centers
- Transit systems, Buses, Metro Subways, Railways
Edge Routers with Enterprise-Grade Routing Capabilities
Perle does not charge any annual subscription or license fees to maintain operation, download software updates, or access features. IRG7000 routers have all the of the advance routing functionality found in the most advanced enterprise routers. Extensive protocol routing support means they can be easily deployed in hierarchical or large mesh network structures. A fast CPU and lots of memory ensure the router can handle a consistent and heavy workload all day long.
- RIP, RIPv2, RIPng, OSPFv1/2/3, BGP-4, VRRP
- When BGP peering with multiple ISPs, the IRG5500 delivers carrier-grade routing performance capable of handling the full Internet routing table
- IPv4 & IPv6
- OpenVPN & IPSec VPN
- DHCP & DHCPv6
- IP Passthrough for deployments requiring the router to operate in Gateway or Bridge mode
- Route between any interface (LTE, Ethernet, USB, or serial RS232)
- Reduce unwanted network traffic by creating collision and/or broadcast domains
Integrated Zone-Based Policy Firewall
The IRG7000 built-in firewall offers intuitive policies for multiple-interface routers to protect inside networks from unauthorized access by users on an outside network. The firewall also protects inside networks from each other, for example, by keeping a human resources network separate from a user network. If there are network resources that need to be available to an outside user, such as a web or FTP server, these resources can be placed on a separate network behind the firewall, in a demilitarized zone (DMZ). The firewall will allow limited access to the DMZ, but because the DMZ only includes the public servers, any attacks there will not affect the inside network. The firewall controls when inside users access outside networks (for example, access to the Internet), by allowing only certain addresses out, by requiring authentication or authorization, or by coordinating with an external URL filtering server. A deny-all (blacklist) policy can be used to prohibit traffic between firewall security zones until an explicit policy is applied to allow desirable traffic. Router ports are assigned to zones and firewall inspection policies are applied to traffic moving between the zones. Firewall inter-zone policies come with considerable flexibility and granularity so that different firewall inspection policies can be applied to the same router port.
GPS / Global Navigation Satellite System (GNSS) Included
GPS and GNSS (Galileo, Glonass, and Beidou) are included by default in all IRG7000 Routers and Gateways. This enables real-time location tracking of remote assets. Also, you can get real-time network clock updates in the router, or any attached equipment, for accurate time-stamp usage in time-sensitive applications.
Cutting-edge design certified for a wide range of deployment scenarios
High-performance components and features enable customers to take advantage of broadband network speeds while running secure concurrent data, voice, and video services. All IRG7000 routers have high MTBF rates because they are developed with certified high-end components to provide superior reliability and uninterrupted operation.
Software Feature Set: IRG7000 LTE Mobilfunk Router
All features and functionality are included in the base price of the product.
There are no additional costs or fees.
Functionality | |
---|---|
Gateway (IP Passthrough Bridging), Switching, Routing | |
Routing / Switching Protocols | |
IPv4/IPv6, Static Routing, RIP/RIPNg, NAT, OSPFv3, BGP-4, IPv6 Encapsulations (GRE, 6in4), VRRP, Port Routing, STP, MSTP, PPPoE V6, LLDP | |
IP Applications | |
DDNS, DNS Proxy / Spoofing, relay, client, Opt. 82, | |
NTP & SNTP (versions 1, 2, 3, 4) with support from GPS, GNSS & Network Carrier timing | |
DHCP / DHCPv6 server & BOOTP for automated network-based setup | |
VLAN & VPN | |
VLAN, IPSec, OpenVPN, VPN Failover (16 concurrent VPN tunnels) | |
GPS & GNSS Reports | |
GPS for tracking equipment over RS232, USB, and Ethernet | |
NMEA 0183 v3.0, TAIP, CSV | |
LTE Applications | |
Private LTE / CBRS - ability to select a specific band for LTE connection | |
Firewall & Security | |
Built in Zone-Based Policy Firewall | |
Access Control Lists (list & ranges & time) | |
Filter based on MAC Address, IP, Port, Protocol, User | |
AAA, LDAP, Radius, TACACS+ | |
802.1x | |
Layer 2 MAC address filtering | |
Certificate Support (X.509) | |
Port Forwarding | |
BGP Communities | |
Security Features | |
Security via remote authentication (LDAP, Radius and TACACS+) | |
Trusted host filtering (IP filtering), allowing only those hosts that have been configured in the host table access to the router. | |
Idle LTE port timers, which close a connection that has not been active for a specified period of time | |
Ability to disable services (for example, Telnet, TruePort, Syslog, SNMP, Modbus, HTTP) for additional security | |
Ability to individually disable network services that won’t be used by the SSH client/server connections (SSH 1 and SSH 2) | |
Logging via syslog | |
Ability to disable Ping responses | |
Ability to setup Access Lists (ACL’s) to restrict traffic | |
Ability to set up firewalls to restrict incoming and outgoing packets | |
SSH client/server connections (SSH 1 and SSH 2) | |
SSL/TLS client/server data encryption (TLSv1/1.1/1.2 and SSLv2) | |
Ability to setup Virtual Private Networks (VPNs) | |
Wireless cellular security using PAP or CHAP authentication | |
Dynamic DNS with DYNDNS.org | |
Domain Name Server (DNS) support | |
Email alert notification | |
SSH connections (supported ciphers are Blowfish, 3DES, AES-CBC, AES-CTR, AES-GMC, CAST, Arcfour and ChaCha20-Poly1305) | |
SSL/TLS connections | |
RIP authentication (via password or MD5) | |
OSPF | |
2F Authentication | |
Management Access Control | |
SNMPv3 | |
DMZ | |
FIPS 140-2 | |
Secure HTTP/HTTPS/FTP/Telnet Authentication Proxy | |
Logging, Reporting & Alerts | |
Sys Log, Event Type, Report Type, Alerts & Monitoring, Triggers Status Screen Report, Data Usage, Diagnostic | |
Management | |
PerleVIEW Management, WEB (HTTP/HTTPS), SNMPv1/v2/v3, RESTful API, SMS Control, Load Balancing, CLI/Piping, Login Banner, E-mail, Ping, Telnet, FTP, Connection on Demand | |
Automatic check for software updates. | |
Software updates available over FTP, HTTP, HTTPS, SCP, SFTP, and TFTP | |
Power Management (General) | |
Power Processor Saving Mode – this feature optimizes idle power consumption, saving energy by reducing performance where possible. | |
Power Saving Features including; LED power saving mode, Smart Standby Mode, Power saving strategies such as turning off unused interfaces (USB, Serial, Ethernet), turning off GPS and adjusting the Ethernet rate. | |
Operating Power Modes
| |
Power Management (Ignition Sense) | |
Configurable time delay for shutdown / start based on vehicle ignition status | |
Low Voltage Standby function to prevent battery drain | |
Operating Power Mode (Ignition mode) – this mode monitors the ignition input and goes in and out of Smart Standby based on the voltage of the ignition input. When the voltage on the ignition input goes below a user pre-defined threshold, the router will be powered down into Smart Standby Mode. When the voltage on the ignition input goes above the Perle Wireless LTE Router pre-defined value the power will be restored. You can configure a combination of inputs and schedule to control Smart Standby Mode. | |
GPIO Capabilities | |
One GPIO configurable as high side pull-up / dry contact, analog input, digital input, low side current sink output, digital output/open drain, or Pulse Counter. | |
One GPIO configurable as Vehicle ignition sense or analog input | |
Two Digital Inputs configurable as high side pull-up / dry contact, digital input, or Pulse Counter | |
One normally open (NO) relay contact | |
Serial Port Capabilities | |
Access: connect directly using Telnet / SSH | |
Terminal Server: Telnet, SSH v1 and v2, Rlogin, Auto session login, LPD, RCP printer | |
Serial to Ethernet: Tunnel raw serial data across Ethernet - clear or encrypted, RAW serial data over TCP/IP/UDP, packetized data, virtual modem, TruePort com/tty redirector, TrueSerial packet technology, RFC2217 transport & RS232 control signals | |
Industrial Protocols Encapsulations: ModBus, DNP3 and IEC-870-5-101, ModBus TCP Gateway | |
Remote Access: PPP, PAP/CHAP, SLIP |
Hardware Specifications: IRG7000 Cellular LTE Routers
Products can be purchased with or without antennas and with or without power cords.
All functionality is included in the base price of the product.
Additional accessories are sold separately.
Cellular | |
---|---|
LTE | 5G LTE. 4.5Gbps downlink and 660Mbps uplink speeds LTE Cat-20, 4G, & 3G fallback |
Frequency Bands | 5G Sub-6 GHz: n1, n2, n3, n5, n7, n8, n12, n20, n25, n28, n38, n40, n41, n48, n66, n71, n77, n78, n79 4G LTE: B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B18, B19, B20, B21, B25, B26, B28, B29, B30, B32, B34, B38, B39, B40, B41, B42, B43, B46, B48, B66, B71 |
SIM | Dual Mini-SIM 15 x 25mm (or 2FF ) |
GPS / GNSS | |
GPS / GNSS | Wide-band GNSS: 1559-1606 MHz GPS: 1575.42 MHz / GLONASS: 1602 MHz / BeiDou: 1561.098 MHz / Galileo: 1575.42 MHz / QZSS: 1575.42 MHz Simultaneous tracking: Up to 30 channels Active GNSS antenna support Reports: NMEA 0183 V3.0, TAIP |
GPS / GNSS Passive Antenna | GNSS Applications: GPS, Glonass, Galileo, Beidou Frequency Range: 1561MHz~1606 MHz Gain: 4 dBi (typical) Impedance: 50 Ohm Voltage Standing Wave Ratio: 2.0 (typical) Polarization: RHCP SMA (M) straight Dimensions: 41.9 x 47.3 x 16.3 mm / 1.65 x 1.86 x 0.64 in RG-174 Cable Lenght: 5 m / 16.4 ft |
Ethernet Ports | |
Type | 4 x 10/100/1000 Ethernet RJ45 Copper |
Speed | Software selectable 10/100/1000 Ethernet, Auto Software selectable Half/Full/Auto duplex |
Ethernet Isolation | 1.5Kv Magnetic |
Standards | IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-TX and 100Base-FX, IEEE 802.3ab for 1000Base-T, IEEE 802.3x for Flow Control |
Processing Type | Store and Forward |
MAC Address Table Size | 8K |
VLAN ID range | 1 to 4000 |
USB-C Port | |
Type | 1 x USB Type-C Configurable for Ethernet over USB |
Serial Port | |
RS232 Serial | 1 x DB9 female connector Serial Port Speeds: 300bps to 230Kbps with customizable baud rate support Data Bits: 5,6,7,8-bit protocol support Parity: Odd, Even, Mark, Space, None Flow Control: Hardware, Software, Both, None Serial Port Protection: 15Kv Electrostatic Discharge Protection ( ESD ) Processing Type - Store and Forward |
RS485 Serial | half-duplex |
Power and Auxillary Connectors | |
One GPIO Input | Digital Input & Pulse Counting VDC: 0 for ≤ 1V, 1 for ≥ 2.7V Dry Contact Max Current range: min 0.6mA @ 7V and max 3.5mA @ 36V Current Sink Output: 0.5A @ 12v |
Ignition Sense | Analog Input: 0.5V to 36V |
Two Digital Inputs | Digital Input & Pulse Counting VDC: 0 for ≤ 1V, 1 for ≥ 2.7V |
One Alarm Relay | Normally Open (NO) dry contact: 1A @ 24VDC |
Platform Specifications | |
Microprocessor | Dual Core ARM 1.2GHz |
RAM | 1GB DDR4 |
Flash | 4GB MMC |
LED Indicators | Power: indicates power status Serial: indicates serial RS232 connection status and Tx data WWAN: indicates Wireless Wide Area Network status GNSS: indicates Global Navigation Systems for GPS, Galileo, Glonas and Beidou status VPN: indicates VPN presence (for Router Models: IRG5520x & IRG5540x only) Internet: indicates Internet connectivity |
Environmental Specifications | Operating Temperature: -40°C to 70°C / -40°F to 158°F Storage Temperature: -40°C to 85°C / -40°F to 185°F Operating Humidity: 0% to 95% non-condensing Storage Humidity: 0% to 95% non-condensing Operating Altitude: 3048 m / 10,000 ft Cooling: EN 60068-2-1 Dry heat: EN 60068-2-2 Damp: EN 60068-2-30 |
Enclosure | Aluminium |
Mounting | DIN Rail (Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175 vertically or horizontally) Panel / wall mount attachement bracket is optional |
Ingress Protection Rating | IP54 |
Power | |
Power Input | 12/24 VDC Nominal (7 to 36 VDC Range) |
External Power Supply (optional) | 110 / 220 VAC Power supply |
Power/Current Consumption | Standby (no activity / all ports shutdown): TBA Idle Mode (connected/no Activity): TBA Typical Use (connected/with Activity): TBA |
Power Line Protection | Surge: 8KV (EN61000-4-5 common mode), 2KV (EN61000-4-5 differential and common modes) |
Ignition Sense | VDC voltage variation with On/Off and timer |
Vehicle Transient voltage protection | Built-in protection against voltage transient including 5 VDC engine cranking and +200 VDC load dump |
Reverse polarity protection | YES |
Weight & Dimensions | |
Product Weight & Dimensions | Weight: 0.59kg / 1.30lbs Dimensions: 146 x 99 x 45 mm / 5.75 x 3.89 x 1.77 in |
Shipping Weight & Dimensions | Weight (with Antenna):1 Kg / 2.20 lb Weight (without Antenna): 0.79 Kg / 1.74 lb Dimensions: 270 x 170 x 70 mm / 10.63 x 6.70 x 2.75 in |
Regulatory Approvals | |
Cellular/Telecom Regulatory Approvals | FCC/ICES, RED, PTCRB/CTIA, CE |
Carrier Certifications | Verizon, AT&T |
Shock & Vibration | MIL-STD-810G (Shock: test method 516.6. Operational Vibration: test method 514.6) SAE J1455 (Vibration: Section 4.10.4.1 and 4.10.4.2 Cab Mount, Shock: Section 4.11.3.4 Operational Shock) EN 61373 (Shock, Vibration long-life / functional-random) |
Hazloc | IECEx/IECx, ATEX Class 1 Zone 2, Directive 2014/34/EU ANSI/ISA 12.12.01, Class 1 Division 2 Groups A-D, ISA 12.12.01-2015 |
Vehicle Usage | E-Mark (UN ECE Regulation 10.04, ISO 7637-2:2011 and ISO 16750-2:2012 ) |
Velocity | < 100m/s |
Railway | EN 50155: 2017 Clause 4.3.6 EN 50121-1: 2017 EN 50121-3-2: 2016 EN 50121-4: 2016 IEC 60571:2012 For Clause 12.2.8 & 12.2.9 IEC 62236-1: 2018 IEC 62236-3-2: 2008 IEC 62236-4: 2018 |
Emissions | FCC 47 Part 15 Subpart B, Class A ICES-003 Issue 6 Class A (Canada) FCC Part 15.247 Subpart C ( 2.4 Ghz) FCC Part 15.407 Subpart E ( 5 Ghz) ANSI C63.4 Class A (Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz) EN61000-3-2: 2014 (Limits for Harmonic Current Emissions) EN61000-3-3: 2013 (Limits of Voltage Fluctuations and Flicker) CISPR 32:2015/EN 55032:2015 Class A (Electromagnetic compatibility of multimedia equipment - Emission requirements) |
Immunity | CISPR 25:2016/EN55025: (Vehicles, boats and internal combustion engines - RDC) CISPR 35:2016/EN 55035:2017 (IR) EN 61000-4-2:2009 (ESD) +/-8 kV (Contact) +/-15 kV (Air) Operating mode: powered on EN 61000-4-3: 2006 + A1:2007 + A2:2010(RS) EN 61000-4-4:2012 (EFT) 2 KV (Criteria A) EN 61000-4-5:2014+AMD1:2017 (Surge) 2KV (line to earth), 1.5KV (line to line) EN 61000-4-6: 2013 (CS) EN 61000-4-8: 2009 (PFMF) EN 61000-4-9: 2016 (PMF) EN 61000-4-11: 2004 + A1:2017 EN 61000-4-16 EN 61000-6-4: 2007 + A1: 2011 ISO 7637-2:2004 |
Safety | UL/IEC 61010-1 UL/IEC 61010-2 UL/EN/IEC 62368-1 (previously 60950-1) CAN/CSA C22.2 No. 62368-1 |
Cellular / Radio Standards | EN 301 489-1 (V2.1.1:2017-02), ETSI EN 301 489-1 V2.1.1 (2017-02) EN 301 489-17 (V3.2.0:2017-03), ETSI EN 301 489-17 V3.1.1 (2017-02) EN 301 489-19 (V2.1.1:2019) EN 301 908-1 v11.1.7:2018-12, ETSI EN 301 908-1 V7.1.1 (2015-03) (Radiated emissions RF control and monitoring) EN 301 908-2 v11.1.2:2017-08, ETSI EN 301 908-2 V11.1.2 (2017-08) (RF conducted) EN 301 908-13 v11.1.2:2017-07, ETSI EN 301 908-13 V11.1.2 (2017-07) (RF Conducted) EN 62311:2019, IEC 62311 Ed. 1.0 b:2007 (Human exposure restrictions for radio frequency electromagnetic fields) |
Environmental Specifications | Reach, RoHS3 and WEEE Compliant |
Other | |
ECCN | 5A992 |
HTSUS Number | 8517.62.0020 |
Customers who viewed this item also viewed