Advantech EKI-1526NL / EKI-1528NL
16-port Console Server / 8-port Console Server
- EKI-1526NL : 16-port RS-232 serial communication
- EKI-1528NL : 8-port RS-232 serial communication
- Cisco pin definition
- Provides 2 x 10/100/1000 Mbps Ethernet ports for LAN redundancy
- Supports up to 921.6 kbps, and any baud rate setting
- Provides COM port redirection (Virtual COM), TCP and UDP operation modes
- Provides rich configuration methods: Windows utility, Telnet console, Web Browser, and serial console
- Built-in 15 KV ESD protection for all serial signals
- SNMP MIB-II for network management
- Built-in buzzer for easy location
The EKI-1528NL-CS and EKI-1526NL-CS are industrial-grade network-based console servers for connecting up to 8 or 16 serial RS-232 devices, such as CNCs, PLCs, scales and scanners, directly to a TCP/IP network. The EKI-1528NL-CS and EKI-1526NL-CS feature Cisco pin-definition and two independent Ethernet ports to provide a redundant network mechanism to guarantee Ethernet network reliability. The EKI-1528NL-CS and EKI-1526NL-CS provide a simple and cost-effective way to bring the advantages of remote management and data accessibility to thousand of devices that can't connect to an Ethernet network. The EKI-1528NL-CS and EKI-1526NL-CS offer multiple ways to configure through Windows utility, Web Browser, serial console or Telnet console, these methods make it easy manage many EKI-1528NL-CS and EKI-1526NL-CS or serial devices on your network.
Specifications
- Ethernet Communications
- Compatibility
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Speed
10/100/1000 Mbps, auto MDI/MDIX
No. of Ports
2
Port Connector
8-pin RJ45
Protection
Built-in 1.5 KV magnetic isolation
Serial Communications
- Port Type
RS-232, software selectable
No. of Ports
EKI-1528NL-CS: 8
EKI-1526NL-CS: 16
Port Connector
8-pin RJ45
Data Bits
5, 6, 7, 8
Stop Bits
1, 1.5, 2
Parity
None, Odd, Even, Space, Mark
Flow Control
XON/XOFF, RTS/CTS, DTR/DSR
Baud Rate
50 bps ~ 921.6 kbps, any baud rate setting
16 ports up to 230.4 kbps simultaneously
Serial Signals
CTS,DSR,RxD,GND,GND,TxD,DTR,RTS
Pinouts
Console | Port Signal |
1 | CTS |
2 | DSR |
3 | RxD |
4 | GND |
5 | GND |
6 | TxD |
7 | DTR |
8 | RTS |
Protection
15 KV ESD for all signals
Software
- Driver Support
Windows XP/7/8.1/10, Windows Server
2003/2008/2012/2016/2019, and Linux
Utility Software
Advantech EKI Device Configuration Utility
Operation Modes
COM port redirection mode (Virtual COM)
TCP/UDP server (polling) mode
TCP/UDP client (event handling) mode
Pair connection (peer to peer) mode
RFC2217 mode
Configuration
Windows utility, Telnet console, Web Browser, serial console
Protocols
ARP, ICMP, IPv6, TCP, UDP, BOOTP/DHCP Client, Auto IP,
Telnet, SNMP, HTTP, DNS, SMTP, NTP
Management
SNMP MIB-II
Mechanics
- Dimensions (W x H x D)
438 x 43.6 x 259.2 mm (17.24" x 1.71" x 10.2")
Enclosure
SECC chassis
Mounting
Rack
General
- LED Indicators
System: Power, System Status
LAN: Speed, Link/Active
Serial: Tx, Rx
Alert Tools
Built-in buzzer and RTC (real time clock)
Reboot Trigger
Built-in WDT and push button for hardware reboot
Power Requirements
- Power Input
100 ~ 240 VAC , 50 ~ 60 Hz
Power Consumption
5.6 W
Environment
- Operating Temperature
-10 ~ 60°C (14 ~ 140°F)
Storage Temperature
-20 ~ 80°C (-4 ~ 176°F)
Operating Humidity
10 ~ 95% RH
Regulatory Approvals
- EMC
CE, FCC Part 15 Subpart B (Class A)
ORDERING INFORMATION
Available Modules | |
EKI-1526NL-CS | 16-port Console Server |
EKI-1528NL-CS | 8-port Console Server |
Customers who viewed this item also viewed